JHARKHAND STAFF SELECTION COMMITTEE
JUNIOR ENGINEER
GENERAL ENGINEERING – PAPER 1
SOLVED PAPER WITH EXPLANATIONS
Jharkhand Staff Selection Committee (JSSC) Junior Engineer General Engineering Exam 2022 – Paper 1 Questions along with solutions and their explanations can be found in the PDF. Download it from StudyCivilEngg for free of cost. Below are the few questions taken from JSSC JE General Engineering 2022 Exam.
QUESTIONS & SOLUTIONS WITH EXPLANATIONS
Question 2: The standard dimensions of a slump cone used in a slump test for measuring fresh-properties of concrete is
(a) bottom diameter-10 cm, top diameter-10 cm, height-30 cm
(b) bottom diameter-20 cm, top diameter-10 cm, height-30 cm
(c) bottom diameter-20 cm, top diameter-20 cm, height-30 cm
(d) bottom diameter-10 cm, top diameter-20 cm, height-30 cm
Answer – (b)
Slump test- This method of test specifies the procedure to be adopted, either in the laboratory or during the progress of work in the field for determining the consistency of concrete.
The internal dimensions of the mould for the test specimen are bottom diameter = 20 cm top diameter = 10 cm and height = 30 cm
Question 5: Labour and material for closing cavities at the jambs and sills shall be measured in
(a) M
(b) M?
(c) M
(d) Numbers
Answer – (a)
As per IS: 1200 Part IIIForming of cavity shall be measured in square meters starting width of cavity and shall include ties and their number per square meter. Labour and material for closing cavities at jambs, sills and heads of openings shall be described and measured separately in running metres.
Question 6: According to Nagpur Road Plan, all roads are classified into categories.
(a) Five
(b) Three
(c) Seven
(d) Nine
Answer – (a)
According to Nagpur Road Plan [1943-19631, all roads are classified into 5 categories.
(i) National highway (ii) State highway (in) Major district roads (iv) Other district roads (v) Village roads
Question 7: When water is not transported by natural flow and is lifted by some mechanical devices it it called
(a) direct irrigation
(b) drip irrigation
(c) lift irrigation
(d) storage irrigation
Answer – (c)
Lift irrigation- Lift irrigation is practised when the water-supply is at too low a level to run by gravitation on to the land. In such a circumstances water is lifted up by mechanical. Irrigation from wells is an example of lift irrigation.
Question 8: The rainwater in the gauge shall be measured every day at Indian Standard Time (IST)
(a) 08:30 h
(b) 10:30 h
(c) 22:30 h
(d) 20:30 h
Answer – (a)
As per IS 4986 : 2002 – The rain water in the gauge shall be measured every day at 8: 30 hour Indian standard time (IST) and the raingauge shall be examined every day at hour even when in the observer’s opinion no rain has follows.
ALL THE REMAINING QUESTIONS OF JSSC JE GENERAL ENGINEERING PAPER 1 2022 EXAM ARE PRESENT IN THE PDF ALONG WITH SOLUTIONS AND THEIR EXPLANATIONS
DOWNLOAD LINK : JSSC JE (GENERAL ENGINEERING) PAPER-1 2022 SOLVED PAPER WITH EXPLANATIONS
PDF PASSWORD: StudyCivilEngg.com
Instructions to download
- Link navigates to StudyCivilEngg website
- Download the PDF File using the Download link mentioned (Google Drive Link)
- Enter the password – StudyCivilEngg.com
OTHER USEFUL POSTS
IES Master GATE Study Material
ACE GATE Study Material
ACE GATE Classroom Notes
ACE AE/AEE Classroom Notes
